DV12-MK3 3,200-watt Single 12-inch Powered Speaker

This product is available to order online. Allow 1 - 2 weeks to process. In case of additional delays, you will be contacted. Please contact us with any questions about this product.

Specifications

Acoustical

Loudspeaker Description: Wide dispersion compact full-range speaker
Frequency Response (±3 dB): 40 - 19,000 Hz
Maximum Sustained Output: 128 dB SPL, 1m
Maximum Measured Output: 134 dB SPL, 1m
Nominal Dispersion (H° x V°): 120 x 20

Electrical

Amplification: 3200 Watt Two-Channel Class D Amplifier
Processing: Integrated comprehensive DSP including high-pass, low-pass, parametric EQ, phase alignment and multi-band limiting
Electrical Connectors, Amp: Neutrik PowerCON True 1 TOP in and through
Electrical Connector, Mains: NEMA 5-15 (Edison)

Voltage Operating Range: 100-240V. Auto-sensing, auto switching universal supply

Current Draw, Nominal: 4.6A @ 120 volts, 2.3A @ 220V (typical, 1/8 max power)
Display: LEDs for Power on/ready, Signal, -12dB, -6dB, limiter active, Thermal, Protect and LAN link active. Eight LEDs indicating selected preset
Signal Input Connector: XLR-F
Signal Output Connector: XLR-M (pass-through only)
LAN Connectors: EtherCON RJ45 (x2)

Physical

Enclosure Type: Self-powered, bi-amplified, 2-way full-range. Direct radiating vented LF section, wave-guide-loaded HF section
Transducer (Low Frequency): 1 x 12” diameter (300 mm) Neodymium motor woofer with 4” (100mm) voice coil
Transducer (High Frequency): 1 x 1.4” throat Neodymium motor compression driver with 3” (76mm) voice coil on isophasic wave guide
Cabinet Construction: 15 mm multi-ply Baltic Birch plywood with internal bracing and damping includes 6 integrated handles, 8 internally braced steel fly points and a 35mm pole socket
Suspension Points: 8 x internally braced M10 threaded mounting points
Dimensions (HxWxD): 24.63” x 14.5” x 19.1” (62.6 cm x 36 cm x 48.5 cm)
Net Weight: 63 lbs. (28 kg)
Shipping Weight: 68 lbs. (30 kg)
Exterior Finish: Rugged, weatherproof, black, textured, bonded high-pressure polyurea coating
Pole Socket: 35mm, Stee

Optional

Stacking Bracket: Adjustable bracket set, mounts second cabinet inverted for near-perfect summed response and line-array style performance. Provides splay-angle adjustment from 0 to 8 degrees
Flying Bracket: Two DV12s can be arrayed together and flown from the DV12 array flying bracket
Shoulder Eye Bolts: Use when connecting to the top anchor points
Side-pull anchors: Use when connecting to the side anchor points
Loop-through PowerCON TOP: Power jumper for chaining power between stacked cabinets