AT312 MK3 4,000W Triple 12-inch 3-way Powered Speaker

This product is available to order online. Allow 1 - 2 weeks to process. In case of additional delays, you will be contacted. Please contact us with any questions about this product.

Specifications

Acoustical

Loudspeaker Description: 3-Way Triple 12” Self-Powered Direct Radiating Co-axial Point Source Full Range
Frequency Response (±3 dB): 60 – 19,000Hz
Maximum Measured SPL: 133 dB 1m (half-space)
Max calculated SPL (Peak): 139 dB 1m (full-space)
Nominal Dispersion (H° x V°): 80 x 80 (Conical)

Electrical

Amplification: 4000W Class D, 3 channel: 2400W LF, 800W MF, 800W HF
Processing: Integrated comprehensive DSP. 96kHz sampling rate with 8 pushbutton presets. All presets include high pass filters, low pass filters, phase alignment, equalization and multi-stage limiting. Storage capacity for up to 100 presets
Electrical Connectors, Amplifier: Neutrik powerCON True 1 TOP IP65 rated waterproof connectors
Electrical Connector, Mains: USA 3-pin grounding 120V electrical plug: NEMA 5-15; Outside USA alternate connectors provided

Voltage Operating Range: 100-240V AC, 50-60Hz (Auto-sensing, auto switching universal supply)
Current Draw, Nominal: 120V: 5.4A (nominal); 240V 2.5A (nominal)
Display: LEDs for Power on/ready, Signal, -12dB, -6dB, Limiter Active, Thermal, Protect and LAN Link Active. Eight LEDs indicating selected preset
Signal Input Connector: XLR-F
Signal Output Connector: XLR-M (Direct pass-through, unprocessed)
LAN Connectors: EtherCON RJ45 (x2) with 2-port Ethernet switch

Physical

Enclosure Type: 3-way mid-high. Direct radiating, vented enclosure LF section, acoustic suspension MF section with co-axially mounted, horn-loaded HF section
Transducer, LF: 2 x 12 in. diameter (300mm) neodymium motor woofer with 4 in. (100mm) voice coil, waterproof cone
Transducer, MF: 12 in. diameter (300mm) neodymium motor midrange driver with 3.5” (88mm) voice coil
Transducer, HF: 1 x 3 in. (76mm) diameter diaphragm compression driver with 1.4” (35mm) exit through 80 degree conical wave guide machined from aluminum pole piece in the center of the midrange driver
Cabinet Construction: CNC machined 18mm Birch plywood with extensive bracing and dado joinery. 4 M10 fly-points. 6 integrated handles. 1 x 35mm steel pole socket
Suspension Points: 4 x internally braced M10 threaded mounting points
Dimensions (HxWxD): 48 in. x 16 in. (f) x 20 in.
Net Weight: 126 lbs. (57 kg)

Shipping Weight: 140 lbs. (63.5 kg)
Exterior Finish: High-pressure, bonded polyurea coating. Rugged, waterproof. Textured black
Grille: Perforated, powder-coated stee

Optional

What’s Included: Loudspeaker, 15’ (5m) Power Cable, Manual, Warranty Card
Hardware: M10 Shoulder Eye Bolts, M10 Side-Pull anchors
Cover: Heavy-duty padded nylon transport cover
GLL/Ease File: help.bassboss.com/portal/en/kb/articles/bassboss-ease-gll-files