AT212 MK3 3,200-watt Dual 12-inch Powered Speaker

This product is available to order online. Allow 1 - 2 weeks to process. In case of additional delays, you will be contacted. Please contact us with any questions about this product.

Specifications

Physical

Loudspeaker Description: 2-way Double 12” Self-powered Vented Direct-radiating Full-range with rotatable 80 x 60 degree Constant Directivity Horn
Frequency Response (±3 dB): 50 – 18,000Hz
Max Sustained Output: 136 dB 1m (full-space)
Maximum Measured Output: 142 dB 1m (full-space)
Nominal Dispersion (H° x V°): 80 x 60 (Rotatable)

Electrical

Amplification: 3200 W Class D, 2 channel; 2400W LF - 800W HF
Processing: Integrated comprehensive DSP. 96kHz sampling rate with 8 pushbutton presets. All presets include high pass filters, low pass filters, phase alignment, equalization and multi-stage limiting. Storage capacity for up to 100 presets
Electrical Connectors, Amp: Neutrik powerCON True 1 TOP - IP65 rated waterproof connectors
Electrical Connector, Mains: USA 3-pin grounding 120V electrical plug NEMA 5-15; Outside USA alternate connectors provided
Voltage Operating Range: 100-240V AC, 50-60Hz (Auto-sensing, auto switching universal supply)
Current Draw, Nominal: 120V 4.6A (nominal); 240V 2.3A (nominal)
Display: LEDs for Power on/ready, Signal, -12dB, -6dB, limiter active, Thermal, Protect and LAN link active. Eight LEDs indicating selected preset
Signal Input Connector: XLR-F
Signal Output Connector: XLR-M pass-through
LAN Connectors: EtherCON RJ45 (x2) with 2-port Ethernet switch

Physical

Enclosure Type: 2-way, Active, Broad Range. Direct radiating vented LF section, horn-loaded HF section
Transducer, LF: 2 x 12 in. diameter (300mm) neodymium motor woofer with 3.5 in. (88mm) voice coils, waterproof cone
Transducer, HF: 1 x 3 in. (76mm) diameter diaphragm compression driver with 1.4” (35mm) exit mounted to 80 by 60 degree constant directivity horn
Cabinet Construction: CNC machined 18 and 15mm Birch plywood with extensive bracing and dado joinery. 4 x M10 fly-points. 4 x steel bar handles. 1 x 35mm steel pole socket
Suspension System: 4 x internally braced M10 threaded mounting points
Grille: Perforated, powder-coated stee
Dimensions (HxWxD): 47.75 in. x 14.3 in. x 17.75 in. with 5.3 in. wide rear
Net Weight: 99 lbs. (45 kg)
Shipping Weight: 109 lbs. (50 kg)
Exterior Finish: Rugged, waterproof, high-pressure bonded polyurea coating textured black

Optional

What’s Included: Loudspeaker, 15’ (5m) Power Cable, Manual, Warranty Card
Hardware: M10 Shoulder Eye Bolts, M10 Side-Pull anchors
Loop-through PowerCON TOP: Power jumper for chaining power between adjacent cabinets
GLL/Ease File: help.bassboss.com/portal/en/kb/articles/bassboss-ease-gll-files